Baby Inflatable Academic Chair Baby Shower Chair Dining Chair BB Small Sofa Portable and Foldable Inflatable Chair Baby Seat

Baby inflatable sofa
Internal pump inflation size: 50x45x30CM
The item contains; Learn to sit in a chair; Inflatable cylinder

Material: Environmentally friendly 6P Material Learning Chair Net 
1. When there is air leakage, please first check whether the inflation plug is tight;
2. If there is an air leak, there must be an air leak. Follow the following method to find it: you can use a small amount of bottled soap water to spray on the fusion joint. If there is leakage, it will produce foam (detergent and detergent will not work, and they will not "bubble"). After identifying the leakage point, wipe the area around the leakage point clean (sandpaper treated flocking surface), and then use the matching repair kit for repair
3. If you cannot find the leaking area and there is a phenomenon of suffocation, the reason is as follows: This product is made of PVC plastic material, which has a certain degree of stretchability. After the first inflation, the material will become slightly swollen and soft, and the material will relax (giving people the feeling that the product is not full and the product is leaking). Therefore, to discover this phenomenon, you only need to replenish the air. Generally, after 3-4 air fills, the material's stretchability has fully expanded and this phenomenon will not occur.
Special reminder: (very important)
1. Due to the significant global temperature difference, please do not inflate the item immediately after receiving it. After eight hours at room temperature, wait for the material to soften slightly before inflating to prevent material hardening due to low temperatures and accidental damage under external forces;
2. Inflatable products can only be used after 8 hours of initial inflation (preferably 12 hours), and a buffering process is required at the tension and seam joints in the air chamber;
3. When a new product is first used, there may be some looseness, which is a normal phenomenon because the material of the air chamber is slightly elastic. After inflation, it will become slightly larger and softer, and it will feel relaxed. As long as the inflation reaches the desired effect again, it is sufficient. In summer, it is not allowed to inflate too much;
4. Ensure that the ground is flat and free from excessive friction and sharp objects
5. The plastic product will have a slight odor when taken out, and you only need to inflate it and leave it in a ventilated area for a few hours before you can feel it.